alat lab Concrete Beam Mold
Concrete Beam Mold , Beam Mold
Cast iron, for forming concrete beam sample dia 15 x 60 cm
Gross Weight : 40 kg / 60 kg
Results for "south"
Core Drill Machine Test
Coredrilling test For cutting core samples from asphalt, concrete and other material on the road, run ways and structures.
spesifikasi coredrill machine test:
– core drilling machine test cast alumunium frame,
– MACHINE BRIDGESTONE USA, HONDA , KOHLER , YAMAHA ( Untuk Mesin Tergantung Ketersediaan ) gasoline engine 5.5 HP, 4 cycle vertical drilling position: rubber caster, up to 4 inc
– sample tong 4 inc
– breaking strip
– galvanized steel
– spanner
– steel 42 mm and 32 m
Deskripsi Proceq Original Schmidt Type N – Concrete Hammer Test
Proceq Schmidt Hammer, Type N
DIFFERENCE Type N & L:
* Type N: Standard impact energy. Minimum thickness of test object: 100 mm (3.9”’) and should be firmly fixed in the structure
* Type L: Low impact energy. Suitable for brittle objects or structures less than 100 mm (3.9”’) thick
OVERVIEW:
The original Schmidt hammer, type N, is designed for non-destructive testing of concrete items 4″ (100mm) or more in thickness, or concrete with a maximum particle size less than or equal to 1.25″ (32mm). It is designed for testing concrete within a compressive strength range of 1,450 to 10,152 psi (10 to 70 N/mm2) and impact energy of the test is 1.6 ft-lbs (2.207 Nm). The (type N) Schmidt hammer is pressed against the concrete structure and the rebound values are displayed on a mechanical sliding scale. These values can then be correlated to compressive strength by using the conversion table chart affixed to the hammer. The original Schmidt hammer is known for its durability and accuracy.
Deskripsi Concrete Cylinder Mold 15 x 30 ( Cetakan Silinder beton ) Murah
CETAKAN SILINDER BETON DIA 15 x 30cm
CONCRETE CYLINDER MOLD
SPESIFIKASI CETAKAN SILINDER BETON
inner size 15 cm dia x 30 cm height
Cast iron, for forming concrete cylinder sample.
Hammer test yaitu suatu alat pemeriksaan mutu beton tanpa merusak beton, metode ini akan diperoleh cukup banyak data dalam waktu yang relatif singkat.
HAMMER TEST MATEST CO-380 ( ITALY )
Product Description For rapid quality control of concrete works with built in Pointer scale and graph for various angle. Type N range 10 to 70 N mm2 100 to 700 kgf cm2 Impact Energy 0 225 mkg 2 207 joule Included certificate calibration by KAN For non destructive strength testing of concrete and structural components . In operation the hammer hits the concrete at a defined energy. Its rebound is dependent on the hardness of the concrete. Through the use of the included conversion table the rebound value can be converted to compressive strength. The standard Type N hammers that displays rebound values on a mechanical sliding scale . For testing thin walled structural components with a thickness of less than 10 cm or rock cores . All models include rubbing stone carrying case and instruction booklet with conversion charts.
Paket Hammer Test terdiri dari :
Hammer Test Rebound
1 bh Gerindra Amplas Bulat
1 bh Tas Kain
1 bh Manual Book
Deskripsi Proceq Original Schmidt Type L – Concrete Hammer Test
Proceq Original Schmidt Type L
DIFFERENCE Type N & L:
* Type N: Standard impact energy. Minimum thickness of test object: 100 mm (3.9”’) and should be firmly fixed in the structure
* Type L: Low impact energy. Suitable for brittle objects or structures less than 100 mm (3.9”’) thick
OVERVIEW:
The original Schmidt hammer, type L is the ideal option for testing thin walled items with a thickness between 50 to 100 mm (2”” and 4”’) or for analyzing small components. It is also suitable for examining cast stone components which are sensitive to impact. In rock mechanics, the type L Original Schmidt is commonly used for the classification of rock cores and brittle rock.
The Type L Hammer is a portable and relatively inexpensive nstrument for measuring the surface hardness of rock. The hammer can be used efficiently in both the laboratory and the field.
The mechanism of operation is simple: a hammer released by a spring, indirectly impacts against the rock surface through a plunger and the rebound distance of the hammer is then read directly from the scale ranging from 10 to 70 MPa (1,450 to 10,152 psi).
The type L hammer is used on NX or larger core specimens or block specimens having an edge length of at least 6 cm. TC-3040 Calibration Anvil, manufactured from a special steel alloy, is used for the calibration of test hammers.