GPS RTK HI-TARGET V60

Fitur Hi-Target V60

Smart Operation:

• Visual LED screen and voice assistance guide your field operation quickly
• Multi one-button operations. Auto base setup by one button without controller
• Standard Rinex data and HI-TARGET raw data recorded at the same time
• Quick upgrade by USB

Multi-constellation Tracking:

• 220 tracking channels
• Supports GPS, GLONASS, GALILEO, BDS, SBAS
• NGS approved GNSS antenna

Optional Transceiver UHF Radio:

• The transceiver UHF radio enables the working mode to be switchable between base and rover
• 2-watt HI-TARGET internal UHF radio and 1-watt Satel internal UHF radio are optional.Satel internal UHF radio is compatible with other radios.

Seamlessly Operation in CORS System:

• Built-in cellular makes V60 work perfectly with network RTK positioning

Powerful Battery:

• Powered by high-capacity (5000mAh) Li-ion battery to insure whole day operation

Rugged Design, IP67:

• IP67 dust/water protection
• Withstands 3-meter natural fall onto concrete

Spesifikasi HI-Target V60

Measurements

• 220 Channels/Saluran
• High precision multiple correlator for GNSS pseudo range measurements.
• Unfiltered, unsmoothed pseudo range measurements data for low noise, low multipath error, low time domain correlation and high dynamic response.
• Very low noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz badwidth.
• Signal to noise ratios reported in dB-Hz

Satellite Signals Tracked Simultaneously

• GPS ………………………….. Simultaneous L1C/A, L2C, L2E, L5
• GLONASS …………………. Simultaneous L1C/A, L1P, L2C/A, (GLONASS M only), L2P
• SBAS ………………………… Simultaneous L1 C/A, L5 (EGNOS, WAAS, MSAS, GAGAN, QZSS)
• Galileo ……………………… Simultaneous L1 BOC, E5A, E5B, E5AltBOC (Optional)
• BDS …………………………. B1, B2

Positioning Performance

• Hot Start …………………. Typically <10s
• Cold Start ………………… Typically <15s

High-precision static

• Horizontal ……………… 2.5 mm + 0.1 ppm RMS
• Vertical ………………….. 3.5 mm + 0.4 ppm RMS

Static and Fast Static

• Horizontal ……………… 2.5 mm + 0.5 ppm RMS
• Vertical ………………….. 3.5 mm + 0.5 ppm RMS

Post Processing Kinematic (PPK / Stop & Go)

• Horizontal …………………. 8mm+1ppm RMS
• Vertical ……………………… 15mm+1ppm RMS
• Initialization time  ……… Typically 10 minutes for base while 5 minutes for rover
• Initialization reliability .. Typically > 99.9%

Real Time Kinematic (RTK) Surveying

• Horizontal …………………. 8mm+1ppm RMS
• Vertical ……………………… 15mm+1ppm RMS
• Initialization time ………. Typically 2-10s
• Initialization reliability .. Typically > 99.9%